Cryl-A-Flex Resurfacers Premier Industrial Flooring in Austin

Physical Properties
		Cryl-A-Shield	Cryla-A-Guard SL	Cryl-A-Floor Cryl-A-Quartz	Cryl-A-Chip
Description	Test Method	Nominal 30 Mils	Nominal 1/8"	Nominal 1/8"	Nominal 1/16"
Hardness (Shore D)	ASTM D-2240	88-92	88-92	88-92	88-92
Compressive Strength	ASTM C-109	6000 psi	8300 psi	8300 psi	6000 psi
Tensile Strength	ASTM D-638	3555 psi	2000 psi	2000 psi	3555 psi
	ASTM C-307	2400 psi	1350 psi	1350 psi	1350 psi
Tensile Elongation	ASTM D-638	34%	7.5%	7.5%	7.5%
Flexural Strength	ASTM D-790	3500 psi	3700 psi	3700 psi	3700 psi
	ASTM C-580	2500 psi	2700 psi	2700 psi	2700 psi
Flexural Modulus of Elasticity	ASTM D-790	4.5 X 10(5)	4.7 X 10(5)	4.7 X 10(5)	4.7 X 10(5)
Linear Expansion	ASTM D-696	3.5 X 10(-5)	3.5 X 10(-5)	3.5 X 10(-5)	3.5 X 10(-5)
Bond Strength to Concrete	ASTM D-4541	400 psi substrate fails	400 psi substrate fails	400 psi substrate fails	400 psi substrate fails
Indentation	ML D-3134	.032 MAX	.025 MAX	.025 MAX	.025 MAX
Impact Resistance	ML D-3134	Pass	Pass	Pass	Pass
Water Absorption	ASTM D-570	0.04%	0.04%	0.04%	0.04%
Heat Resistance Limitation		140 f	140 f	140 f	140 f
Flammability	ASTM D-635	Self Extinguishing	Self Extinguishing	Self Extinguishing	Self Extinguishing
Abrasion Resistance	ASTM D-4060
CS17 Wheel 1000 FM Load 1000 Cycles	ASTM D-4060	29 mg loss	21 mg loss	21 mg loss	29 mg loss
Coefficient of Friction	ASTM D-2047
Standard Slip Resistant	ASTM D-2047	NA	NA	0.7	NA
Smooth	ASTM D-2047	0.5	0.5	0.5	0.5
VOC Content		<100 g/l	<100 g/l	<100 g/l	<100 g/l1
Note: ( ) denotes scientific notation

Physical Properties